Currently Empty: 0,00 €
Extra-long flat Japanese blade, especially designed for making deep cuts e.g. attaching cello, bass and guitar necks. Premium quality, double-layered steel, red oak handles.Max. working depth 230 mm. Blade length 140 mm, max. working depth 230 mm, blade width 30 mm.
258,00 € excl. VAT
Cornerblock gauges for carving of the corner blocks in the ribs. Octagonal tapered beach handles. Ready-to-use inside bevel. Herdim® Violin Maker’s GougesOur violin maker’s gouges are made of premium German carbon steel, hand-forged under a spring hammer by traditional company Henry Taylor of Sheffield, UK. This gives them supreme ...
From: 49,00 €
Using this tool makes opening of the instrument an easy task. Tapered blade can be easily bounced with hammer on the thicker (2 mm) end, very thin blade 0.4 mm easily opens the plate-rib joint. The corner and endblocks can be gently opened from the inside of the instrument, ...
63,00 € excl. VAT
Well balanced set covering all sweeps and widths necessary for carving violin, viola, cello scrolls. Octagonal tapered beach handles. Ready-to-use bevel. Herdim® Violin Maker’s GougesOur violin maker’s gouges are made of premium German carbon steel, hand-forged under a spring hammer by traditional company Henry Taylor of Sheffield, UK. This ...
From: 46,00 €
In leather tool roll. The set contains scroll gouges No. 715531 – 540 and cornerblock gouges No. 715551 – 552. Well balanced set covering all sweeps and widths necessary for carving violin, viola, cello scrolls. Octagonal tapered beach handles. Ready-to-use bevel. Herdim® Violin Maker’s GougesOur violin maker’s gouges are ...
623,00 € excl. VAT
Push-style carving gouges for instrument-making and light-duty carving. The thin, laminated blades are finishground but have not yet been sharpened. The conical tangs are integrated into the handles to allow you to hold the tool close to the blade and improvecontrol of the tool. Akagashi (Japanesered oak) handle. The ...
77,00 € excl. VAT
Push-style carving gouges for instrument-making and light-duty carving. The thin, laminated blades are finishground but have not yet been sharpened. The conical tangs are integrated into the handles to allow you to hold the tool close to the blade and improvecontrol of the tool. Akagashi (Japanesered oak) handle. The ...
77,00 € excl. VAT
Push-style carving gouges for instrument-making and light-duty carving. The thin, laminated blades are finishground but have not yet been sharpened. The conical tangs are integrated into the handles to allow you to hold the tool close to the blade and improvecontrol of the tool. Akagashi (Japanesered oak) handle. The ...
70,00 €
Hand-forged gouges for hollowing the tops and backs of stringed instruments. The double layered (Blue Paper Steel) blades hold their edge well even when working seasoned maple. The drop-shaped Japanese red oak handles rest comfortably in your hand during use. Slightly rounded, shovel-like blades. Spoon GougesWith a bent blade ...
From: 177,00 €
Taper-ground blades made of high-quality tool steel (63 HRC), for bowmaking. Boxwood handles. Blade length 50 mm.
35,00 €
The shaft and blade are forged from a single piece, finely ground and polished. Spoon GougesWith a bent blade and inside bevel for shaping the tops and backs of stringed instruments. Blade width 12 mm, blade length 20 mm, overall length 250 mm.
From: 83,00 €
Swedish Scroll Gouges and Cornerblock GougesFine gouges for shaping the scrolls and finishing the necks of stringed instruments. Short, finely polished blades with drop-shaped ash handles treated with oil. Blade length 140 mm, overall length 230 mm, blade width 27 mm, sweep 5, inside bevel.
165,00 € excl. VAT
- 1
- 2
Showing 1–12 of 14 results
