fbpx

HERDIM peg shapers

Bushing Driving Head

Article no.: 492523
(0)
Rosewood head with M6 screw makes shaving of bushings easy and comfortable.
9,00  excl. VAT
Herdim® System Peg ShaperWith this peg shaper the Herdim system pegs are trimmed to the correct diameter and taper size. The guiding block is exactly matched to the individual diameter, for different peg sizes the block is exchanged (1). For small corrections of the peg position and the joint ...
36,00 
The most versatile peg shaper available for professional restoration work. The Herdim Multi is variable in diameter and taper, allowing pegs to be shaped to the exact dimensions of the existing pegholes. This saves time and preserves the instrument by requiring little or no trimming of the pegbox. The ...
From: 380,00 
22-piece set of tools for fitting pegs of all sizes from 1/16 violin – 4/4 cello, as well as for making peghole bushings.Peg shapers (one of each) No. 730101, -102, -201, -202, -203; 8 repl. blades No. 730100, 6 repl. blades No. 730200.Peg reamers (one of each) No. 730501, ...
1009,00  excl. VAT

Herdim® Peg Shapers

Article no.: 730102
(0)
Ø 8 x 6.3 / 8.5 x 6.8 / 9 x 7.3 / 9.5 x 7.8 mm   Herdim® Peg ShapersMade in Germany We offer seven different models, each with a range of peg hole sizes, allowing them to cover the whole spectrum of peg sizes. The brass bodies ...
From: 160,00 
The Herdim Rotex peg shaper enables you to trim even larger quantities of violin pegs precisely and efficiently. Working similar to a mechanical pencil sharpener the peg is inserted into the cutting cone while the crank is turned. It cuts quickly by a rotating cylindrical blade with spiral edges, ...
497,00  excl. VAT
Anodized aluminium body. Brass adjustment screws. Extra hard tool steel blade (62 Rockwell), honed edge. End-Diameter (final diameter at the peg collar) Ø 7.5 mm. Herdim® System Peg ShaperWith this peg shaper the Herdim system pegs are trimmed to the correct diameter and taper size. The guiding block is ...
295,00  excl. VAT
These extra-thick HSS blades offer longer edge life and smoother cutting performance than conventional blades. Hardness 64 HRC, sharpenable. Single-sided. Thickness 2.5 mm. Length 50 mm.  
From: 12,00 
Alloyed tool steel with cutting edges hardened to 61 HRC, double-sided, not resharpenable. Blade thicknesss 1 mm. Length 50 mm.  
From: 6,00 
For Herdim® System Peg shaper No. 730105.
18,00  excl. VAT

Showing all 10 results

Recently Viewed Products