fbpx

Tools for Herdim® Peg System

Herdim® System Peg ShaperWith this peg shaper the Herdim system pegs are trimmed to the correct diameter and taper size. The guiding block is exactly matched to the individual diameter, for different peg sizes the block is exchanged (1). For small corrections of the peg position and the joint ...
36,00 
Anodized aluminium body. Brass adjustment screws. Extra hard tool steel blade (62 Rockwell), honed edge. End-Diameter (final diameter at the peg collar) Ø 7.5 mm. Herdim® System Peg ShaperWith this peg shaper the Herdim system pegs are trimmed to the correct diameter and taper size. The guiding block is ...
295,00  excl. VAT
Enddiameter: 7.2 mm Using the calibrated stop rings on Herdim® reamers enables you to trim the pegholes to a definite diameter matching precisely the end-diameter of the Herdim standardized pegs. The same applies to the conical holes of endbuttons and cello and double bass endpins. The stop rings are ...
7,00 
Using the calibrated stop rings on Herdim® reamers enables you to trim the pegholes to a definite diameter matching precisely the end-diameter of the Herdim standardized pegs. The same applies to the conical holes of endbuttons and cello and double bass endpins. The stop rings are tapered in ultimate ...
17,00  excl. VAT
Using the calibrated stop rings on Herdim® reamers enables you to trim the pegholes to a definite diameter matching precisely the end-diameter of the Herdim standardized pegs. The same applies to the conical holes of endbuttons and cello and double bass endpins. The stop rings are tapered in ultimate ...
25,00  excl. VAT
The Herdim peghole reamers for Violin- and Cellopegs can be used with the beautiful rosewood handles in knob or spindle shape or drive them with a cordless power drill. In this case the cutting action is especially smooth and effortless.
From: 119,00 
The cutting edges of the regular Herdim reamers are bevel ground to a sharp edge, resulting in an aggressive cutting action. This smoothing reamer however has cutt­ing edges which are on one side slightly rounded, according to the radius of the reamer. This reduces the cutting performance but improves ...
119,00  excl. VAT
For Herdim® System Peg shaper No. 730105.
18,00  excl. VAT
The 1/4″ magnetic handle holds the reamer safely when manually operated without power tool.
From: 9,00 
The 1/4″ magnetic handle holds the reamer safely when manually operated without power tool.
From: 9,00 

Showing all 10 results

Recently Viewed Products